HP 700 - Manual (Page 112)

All menu modes
Default: Software
Page format
Size
4-4
Company confidential. Murillo/Ravillo User’s Guide. Final Freeze Status: Frozen
This is the cyan on page 4-4 (seq: 110)
This is the black on page 4-4 (seq: 110)
To Adjust the Page Size from the Front Panel
Size
In Front Panel Comments
Software The plotter looks to the plot you have sent for
a page size instruction. If it is present the
plotter uses this. If not, the plotted page size
is the inked area plus margins.
Inked area The plotted page size is the inked area plus
margins. For a definition of “inked area”, see
page 4-2.
ISO Best ISO A “Best ...” options
Th l tt h th ll t i
ISO A0/1/2/3/4
The plotter chooses the smallest page size
(from the A-series: A4, A3 etc.) that will hold
ANSI Best ANSI
( )
the inked area of the plot. For example, if the
inked area of the plot is between A3 and A4,
ANSI E/D/C/B/A
inked area of the lot is between A3 and A4,
the plotter chooses A3 as the page size.
Di t ti
JIS Best JIS B
Discrete options
ISO
A0/1/2/3/4
JIS B1/2/3/4
ANSI E/D/C/B/A
JIS B1/2/3/4
ARCH Best ARCH
J S / /3/
ARCH E1/E/D/C/B/A
Over A1/2
ARCH E1/E/D/C/B/A
Over A1/2
The plotted page size is exactly the size you
Oversize (No “Best” option)
specify. The largest discrete page size you
can specify depends whether your plotter is
Over A1/2
y y
an E-size or D-size model.
If you need to adjust the page size from the front panel, do so before sending the
plot file from your computer, as the plotter determines the size of a plot at the time
it is received from your application.
Controlling the Page Format
Page Size