HP 700 - Manual (Page 171)

9-7
Company confidential. Murillo/Ravillo User’s Guide. Final Freeze Status: Frozen
This is the cyan on page 9-7 (seq: 169)
This is the black on page 9-7 (seq: 169)
Solving Print-Cartridge Problems
If the Access Cartridge(s) Key Does Not Work
Make sure the window is closed before you press Access Cartridge(s) .
If the Plotter Runs the Cartridge-Alignment Routine
Unexpectedly
The plotter runs the automatic cartridge alignment procedure every time you
load, replace or even reseat a cartridge, whether it is a new cartridge or not. Do
not remove the cartridge(s) unnecessarily.
You can stop the alignment by pressing Cancel , but the plotter will restart the
alignment procedure the next time you switch it on.
If Brand New Cartridge(s) Have Problems
Check the cartridge(s) to be sure you have removed the protective nozzle tape.
Try reseating the cartridge(s).
Don’t forget that, after you remove or reseat a cartridge, the plotter will run its
automatic cartridge alignment procedure – see page 3-27.
For troubleshooting other problems with the print cartridge(s), see the section
starting on page 9-16.
This is the magenta on page 9-7 (seq: 169)
!
TROUBLE- SHOOTING
9
Troubleshooting
Solving Print-Cartridge Problems