HP 700 User Manual
Page 101
All menu modes
Default: Normal
Device setup
Drying time
3-23
Company confidential. Murillo/Ravillo User’s Guide. Final Freeze Status: Frozen
This is the cyan on page 3-23 (seq: 99)
This is the black on page 3-23 (seq: 99)
To Adjust Drying Time
You can make a global adjustment to the plotter’s automatic drying times through
the front-panel menus.
Drying Time Selected
in Front Panel
Result
None*
The plotter cuts plot without delay.
Less
Adjusted for the driest expected environmental
conditions.
Normal
As described in the table on page 3-22
More
Adjusted for the most humid expected environmental
conditions.
* Not
recommended if you are using roll media and leaving the plotter unattended, as the ink
may smear when the plots are dropped into the media bin.
If you are operating your plotter in an extremely dry environment, select
Less
in
the front panel menu. In an extremely humid environment, select
More
. For
environmental specifications, see page 11-4.
IMPORTANT
Adjusting drying times purely to speed up the plotter is not recommended as the
quality of your plot can be impaired.
MEDIA
AND
CAR
TRIDGES
3
Working With Media and Cartridge(s)
Unloading Media