HP 700 - Manual (Page 13)

xi
Company confidential. Murillo/Ravillo User’s Guide. Final. Freeze Status: Frozen
This is the cyan on page xi (seq: 11)
This is the black on page xi (seq: 11)
If the Plotter Produces a Black and White Plot When You Expected a Color
ąPlot (DesignJet 750C Plus)
9-14 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
If the Plotter Has Printed a Different Plot Than the One You Were
ąExpecting
9-15 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
If the Quality Of a Color Plot Is Not as Good as You Were Expecting
(DesignJet 750C Plus) 9-15 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Solving Print Quality Problems 9-16 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
If the Color Is Not as Expected 9-16 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
If there are White Streaks in Solid Fill Areas 9-16 . . . . . . . . . . . . . . . . . . . . . . . .
If there are Other Gaps in Solid Areas or in Lines (DesignJet 750C Plus) 9-17 .
If there are Jagged Vertical or Horizontal Lines 9-18 . . . . . . . . . . . . . . . . . . . . . .
If there are Slightly Warped Lines 9-18 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
If there are Color “Shadows” (DesignJet 750C Plus) 9-18 . . . . . . . . . . . . . . . . . .
If One or More Cartridges are not Printing at All 9-18 . . . . . . . . . . . . . . . . . . . .
If there are Blurred Lines (Ink “Bleeds” from Lines) 9-19 . . . . . . . . . . . . . . . . . .
If there are Blotchy Areas (Uneven Fill Density) 9-19 . . . . . . . . . . . . . . . . . . . . .
If the Plot Is Too Dark or the Color Too Saturated 9-19 . . . . . . . . . . . . . . . . . . . .
If there Is Pronounced Banding In Area Fills 9-20 . . . . . . . . . . . . . . . . . . . . . . . .
If Ink Smears After You Remove a Plot 9-20 . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Solving Front Panel Problems 9-21 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
If the Access Cartridges Key Does Not Work 9-21 . . . . . . . . . . . . . . . . . . . . . . .
If None of the Front Panel Keys Work 9-21 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
If Page Format/Rotate Does Not Work 9-21 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
If A Display Message Will Not Clear 9-21 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
If A “System Error” Message Is Displayed 9-22 . . . . . . . . . . . . . . . . . . . . . . . . .
If An “Out Of Memory/Data Was Lost” Message Is Displayed 9-22 . . . . . . . . . .
Solving Miscellaneous Problems 9-23 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
If the Plotter Does Not Plot 9-23 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
If the Plotter Seems Too Slow 9-23 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
If the Plotter Waits Too Long to Plot a Nest 9-24 . . . . . . . . . . . . . . . . . . . . . . . . .
If the Plotter Performs the Cartridge Alignment Routine Unexpectedly 9-24 . . .
If the Bail (Black Metal Bar) Does Not Lower All the Way 9-24 . . . . . . . . . . . .
Getting Help 9-25 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
What to Do Before You Call 9-25 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
If a Repair Is Needed 9-25 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
CONTENTS
Contents