HP 700 - Manual (Page 214)

12–2
Company confidential. Murillo User’s Guide. Edition 1 Freeze Status: Not Frozen
This is the cyan on page 12–2 (seq: 212)
This is the black on page 12–2 (seq: 212)
ac Alternating current.
addressable dpi A resolution higher than nominal
value of the cartridges, giving a finer grid on which
the plotter can selectively position dots and improve
print quality.
ANSI size An American standard paper size; e.g.
D, E, etc.
application The software you use.
bail The black metal bar inside the plotter, which
holds the media in place.
baud rate The data transmission rate in a serial
interface between a computer and a device, in bits
per second.
Bi-tronics A standard for the parallel interface
between computer and device, compatible with
Centronics.
CAD Computer-aided design.
cartridge Print cartridge, containing ink.
Centronics A standard for the parallel interface
between computer and device. Compatible with
Bi-tronics.
clear film See-through, polyester media type.
clipping Losing part of a drawing at the edges.
CMYK Cyan, magenta, yellow and black. The
colors of the plotter’s four inks, and also a standard
color model.
coated paper Good quality paper coated on one
side for inkjet printing.
dc Direct current.
default A value or condition that is assumed if no
other value or condition is specified.
device An external item connected to the
computer: printer, plotter, tape drive etc. Your
HP DesignJet is a device.
dpi Dots per inch, a measure of print resolution.
driver The software that controls the
communication between a computer and a device.
front panel The control panel on the front of the
plotter.
front-panel menus The options in the front-panel
display.
GIS Geographical information system (mapping
software).
graphics language A programming language
telling a print device how to output graphic data.
grayscale Shades of gray to represent colors.
high-gloss film A glossy, opaque, polyester media
type.
Glossary