HP 700 User Manual
Page 29
1-9
Company confidential. Murillo/Ravillo User’s Guide. Final Freeze Status: Frozen
This is the cyan on page 1-9 (seq: 27)
This is the black on page 1-9 (seq: 27)
Task 3: Switch On and Change the Language From
English (Optional)
The plotter’s front-panel menus and all the plotter’s sample plots are available in
the following languages
1
: English, French, German, Italian, Japanese, Portuguese,
and Spanish. By default, the language is English.
Be sure that the power cord supplied with your plotter matches your ac power
connection requirements. Use only three-wire (earth-grounded) power cords
with this plotter.
1
Make sure that the power switch on the front of the plotter is OFF.
2
Plug the power cord into the socket at
the back of the plotter, and then into
your power outlet.
1848
3
Switch on the plotter by pushing the power switch. Then go to Step 4.
on
If there is no sound, nor any light on the front panel, you have a power problem.
1843
1 The physical front-panel overlay is also available in Chinese, Korean and Taiwanese.
SETUP
1
Setting Up the Plotter
Task 3: Switch On and (Optional) Change the Language From English
W A R N I N G
If English OK
or if you have
already
changed the
language