HP 700 User Manual
Page 26
700
750C Plus
700
750C Plus
1-6
Company confidential. Murillo/Ravillo User’s Guide. Final Freeze Status: Frozen
This is the cyan on page 1-6 (seq: 24)
This is the black on page 1-6 (seq: 24)
Task 2: Install Memory Expansion Modules (Optional)
Your plotter comes with 5.5 MB of standard memory.
Your plotter comes with 11 MB of standard memory.
You can expand this by adding one or two memory expansion modules, in any
combination. Supported sizes are 4 MB, 8 MB, 16 MB and 32 MB. So the
maximum standard memory for your plotter is:
5.5 + 32 + 32 = 69.5 MB
11 + 32 + 32 = 75 MB
For HP part numbers, see page 11-14.
1
Make sure that the plotter is switched OFF and that neither the power cord
nor an interface cable is connected.
X
X
1847
Setting Up the Plotter
Task 2: (Optional) Install Memory Expansion Modules