HP 700 - Manual (Page 131)

Affects next plot sent.
Software setting
takes priority.
5-13
Company confidential. Murillo/Ravillo User’s Guide. Final Freeze Status: Frozen
This is the cyan on page 5-13 (seq: 129)
This is the black on page 5-13 (seq: 129)
To Change the Print Quality
1 Use the front-panel Print Quality key to toggle between the three print quality
settings.
STATUS
Ready to plot
Normal
Fast
Print Quality
Best
0027
If you are using one of the software drivers supplied with the plotter, you can
also make this setting (or an equivalent) within the driver. In this case, the
driver setting will override the front-panel setting. The front-panel setting will,
however, remain available as the default value, and the front-panel light
displayed will not change.
2 Send the plot from your computer.
The setting also impacts the plotter’s internal sample plots.
You cannot change the print quality setting for plots already in the plotter’s queue.
PLOT APPEARANCE
5
Controlling a Plot’s Overall Appearance
Choosing an Appropriate Print Quality