HP 700 - Manual (Page 40)

700
750C Plus
1-20
Company confidential. Murillo/Ravillo User’s Guide. Final Freeze Status: Frozen
This is the cyan on page 1-20 (seq: 38)
This is the black on page 1-20 (seq: 38)
Task 5: Load the Print Cartridge(s)
Cartridge types IMPORTANT Your plotter is designed to operate only with the cartridges whose
part numbers are listed on page 11-15, and samples of which are supplied with the
plotter.
The HP DesignJet 700 is supplied with two black cartridges (one is a spare cartridge).
The HP DesignJet 750C Plus is supplied with five cartridges:
– yellow
– cyan
– magenta
– black (plus one spare black cartridge)
For the 750C Plus, each stall in the carriage has a dot indicating the color of the
cartridge that should be installed. You must put the correct cartridge in the correct
stall otherwise not only will your colors be wrong, but also print quality may be
impaired. The sequence of the colors is, from left to right, yellow, cyan, magenta
and black.
Yellow
Cyan
Magenta
Black
00019
For users with color-vision deficiencies. You can identify the colors of the
cartridges by the part numbers on the boxes – see page 11-15.
Note. Except on glossy media types, the plotter will operate successfully in
monochrome with just the black cartridge loaded, but these instructions assume
that you are loading all four cartridges.
This is the magenta on page 1-20 (seq: 38)
This is the yellow on page 1-20 (seq: 38)
Setting Up Your Plotter
Task 5: Load the Print Cartridge(s)