beautypg.com

HP 700 User Manual

Page 195

background image

10-5

Company confidential. Murillo/Ravillo User’s Guide. Final Freeze Status: Frozen

This is the cyan on page 10-5 (seq: 193)

This is the black on page 10-5 (seq: 193)

Message

Explanation and

Action

STATUS
Returning cartridge(s)

The cartridge carriage is returning to its station at the left of the plotter.

STATUS
Roll feed edge trim

The plotter is trimming the edge of roll media.

STATUS
Initializing

The plotter is doing an internal check during power-up.

STATUS
Out of media

The plotter has received a file, is ready to print, but has no media loaded.

STATUS
Printing

The plotter is printing.

STATUS
Printing (Special)

The plotter is printing with a special print mode controlled by your software rather
than by the plotter.

STATUS
Ready for media

The plotter is ready for you to load media.

STATUS
Ready

The plotter is ready to print.

STATUS
Receiving

The plotter is receiving or has received plot data.

STATUS
Testing cartridge(s)

The plotter is testing the cartridge(s) for problems, i.e., clogged cartridge or bad
electrical connection (improper seating).

Switch power off
Check cartridge path

Turn off the plotter. The cartridge carriage cannot move. The plotter may be
jammed with media.

Check the media path and clear it if necessary. Then turn on

the plotter.

Switch power off
Check paper path

Turn off the plotter. The drive roller cannot move or the roll feed spindle cannot
freely rotate. The plotter may be jammed with media.

Check the media path and

clear it if necessary. Then turn on the plotter.

System error
XXXXXX

An internal error has occurred and a system error number is displayed.

Press

Enter

; this may clear the error and allow you to continue. If you cannot continue,

turn off the plotter, then turn it on again. If you still see the system error message,
record the system error number and have the plotter serviced. For support
details, see page 9-25.

Wrong cartridge type

You have loaded one or more incompatible cartridges.

Replace the cartridges with

those appropriate for this plotter.

MESSAGES

10

Front-Panel Messages