Canon imagePROGRAF TM-300 36" Large-Format Inkjet Printer with L36ei Scanner Kit - Manual (Page 894)

4911
Cause
The media type specified in the printer driver is not the same as the media type loaded in the printer.
What to Do
• Changing the printer driver print settings
Follow the steps below to match the media type in the printer driver and the media type specified for
the printer.
1. Tap Cancel on the touch screen to stop printing.
2. Change the media type in the printer driver settings to the media type loaded in the printer, and
then try again.
• Replacing paper
Follow the steps below to match the media type in the printer driver and the media type specified for
the printer.
1. Tap Cancel on the touch screen to stop printing.
2. Load the paper with the media type set in the printer driver, and then try again.
Loading and Printing on Rolls
Loading and Printing on Sheets
• Printing without changes
To continue printing, tap Print with the loaded paper. on the touch screen.
However, note that this error may cause paper jams and affect the printing quality.
894