Canon imagePROGRAF TM-300 36" Large-Format Inkjet Printer with L36ei Scanner Kit - Manual (Page 77)

Keeping Track of the Amount of Roll Paper Left
There are two methods of managing the amount of roll paper left: by using the barcode and by estimating
the amount of roll paper left.
Managing by the Barcode for the Amount of Roll Paper Left
When you set Manage remaining roll amount to Barcodes in Device settings on the Home screen, the
amount of remaining roll paper and the media type information are printed as a barcode and text when the
paper is removed. When
Manage remaining roll amount is set to Barcodes and you load roll paper with
a printed barcode, the media type and remaining amount are automatically detected after the roll paper is
loaded. The barcode will be cut off after it has been read.
Important
• If the barcode on the roll is not detected, enter the type and length of paper on the operation panel.
The length of the paper at this time can be set in Roll length (change default) .
Setting the Default Value of the Amount of Roll Paper Left when Managing by the Barcode
Follow the steps below when setting Manage remaining roll amount to Barcodes .
1. Tap ( Setup ) on Home screen of operation panel.
Note
• If the Home screen does not appear, press the HOME button.
2. Tap Device settings .
3. Tap Paper-related settings .
4. Tap Manage remaining roll amount .
5. Tap Barcodes .
77