Canon imagePROGRAF TM-300 36" Large-Format Inkjet Printer with L36ei Scanner Kit - Manual (Page 325)

Setting Criteria for Printer Search/Searching Specific Printer
You can set the criteria for printer search when you start up IJ Network Device Setup Utility or update the
printer search, or you can search the specific printer.
Changing these settings may detect the printer you want to use if it is not detected
Note
• If the printer you want to use is not detected, it may be detected by entering IP address, subnet mask,
or default gateway on the operation panel and search again.
Setting Criteria for Printer Search
Searching Specific Printer
Setting Criteria for Printer Search
1. Start up IJ Network Device Setup Utility.
2. Check the displayed message and select Yes .
3. Select Printer Network Setup on the displayed screen.
Detected printers are listed.
4. Select Search Settings... on Option menu.
The Search Settings screen appears.
5. Enter criteria for printer search.
A: Search Time:
Specifies the time to search printers.
B: Time out:
Specifies the timeout length for not receiving a response from printer.
Note
• Printers you want to find are more likely to be detected as the values are larger, however, it may
take a while to search them.
325