Canon imagePROGRAF TM-300 36" Large-Format Inkjet Printer with L36ei Scanner Kit - Manual (Page 168)

Paper-related settings
This setting item is displayed by tapping Device settings after tapping ( Setup ) on the HOME
screen.
• Keep media type
Select Enable to keep using the same type of paper.
• Manage remaining roll amount
Selects the method to manage remaining roll amount and that to display warning when the roll is
running short.
◦ Barcodes
Manages remaining roll amount by using a barcode.
By using the barcode every time you replace a roll, you can manage remaining roll amount properly.
Specify the roll length properly when you load a new roll.
◦ Warning message only
Estimates remaining roll amount by using media type and roll diameter information. A warning
appears when remaining roll amount comes closer to the specified value.
Depending on the environment you are using the printer, selecting this setting may not manage
remaining roll amount as precisely as you expected. We recommend you select a higher value for
this setting item.
◦ Disable
Select to disable managing remaining roll amount.
• Roll amount warning setting
Specifies when to warn the remaining roll paper amount.
• Detect paper setting mismatch
Selects printer action when you start printing with the paper size, the media type, and print settings
different from those registered.
• Advanced paper settings
Specifies advanced paper settings for each paper type.
Important
• You can select Extension for borderless printing as a setting item for some paper types.
If you select Small for Paper with adequate width on this setting item, a slight border remains on
the paper. In addition, the paper may be smudged with extra ink.
• Paper size recognition settings
Selects which size is preferred when paper size detection is enabled.
◦ Roll paper setting 1
168