Canon imagePROGRAF TM-300 36" Large-Format Inkjet Printer with L36ei Scanner Kit User Manual

Page 699

Cutter Blade Does Not Work While Cutting Is in Progress

Check 1

Does a message appear on the touch screen?

If the cutter blade failed to cut the paper, it stops moving and a message appears on the touch screen.

Remove the paper and try printing again.

Check 2

Make sure the cutter blade can cut paper used currently.

Select

User cut

for

Cutting mode

in the touch screen menu and cut the roll paper with a cutting implement such

as scissors.

Check 3

Check the setting value for

Cut speed

Selecting slower value may enable the cutter blade to cut paper.

Select

Paper settings

Advanced

Paper menu

in the touch screen menu, and change the

Cut speed

setting.

Check 4

Is the edge of the cutter blade blunt?

Replace the cutter blade.

699