Canon imagePROGRAF TM-300 36" Large-Format Inkjet Printer with L36ei Scanner Kit User Manual
Page 160
IPv4 default gateway
XXX. XXX. XXX. XXX (12 characters)
IPv4 DNS dynamic setting
Enable
/
Disable
IPv4 DNS host name
XXXXXXXXXXXX
IPv4 DNS domain name
XXXXXXXXXXXX
IPv6 link-local address
XXXX: XXXX: XXXX: XXXX:
XXXX: XXXX: XXXX: XXXX (32 characters)
IPv6 link-local prefix length
XXX (up to 3 digits)
MAC address
XX:XX:XX:XX:XX:XX (12 characters)
IPsec settings
Disable
Printer name
XXXXXXXXXXXXXXX (up to 15 characters)
Bonjour service name
XXXXXXXXXXXXX
XXXXXXXXXXXXX
XXXXXXXXXXXXX
XXXXXXXXXXXXX (up to 52 characters)
("XX" represents alphanumeric characters.)
To change the setting, tap
Settings
.
◦
Enable/disable Wireless Direct
Select
Enable
to wirelessly connect without wireless router.
◦
Update SSID/password
Updates the identifier (SSID) and password.
◦
Wireless Direct device name
Changes the name (device name) of the printer displayed on Wi-Fi Direct compatible device.
◦
Connection request confirmation
Changes the display / non-display of the confirmation screen when Wi-Fi Direct compatible devices
are connected to the printer.
Note
• By tapping
Advanced
, you can set LAN in detail.
For the items that can be set, see the following.
•
Wired LAN
The following setting information on the Wired LAN connection is displayed. (Some items are not
displayed depending on printer settings.)
Items
Setting
Connection
Enabled (connected)
/
Enabled (disconnected)
/
Disa-
ble
IPv4 address
XXX. XXX. XXX. XXX (12 characters)
IPv4 subnet mask
XXX. XXX. XXX. XXX (12 characters)
160