Receiving printer status by e-mail – Canon imagePROGRAF TM-300 36" Large-Format Inkjet Printer with L36ei Scanner Kit User Manual
Page 255
Receiving Printer Status by E-mail
You receive the printer status information such as the remaining ink level and the error from the printer.
Note
• Specify the mail server settings in advance.
• If you did not specify the date and time setting using the printer's operation panel, the date and time
may not be reflected on the sent e-mail. We recommended that you set the date and time setting using
the printer's operation panel.
For the date and time setting, see
.
• These functions can be set only when you are logged in administrator mode.
1.
2.
Select
Device settings
.
3.
Select
Status notification e-mail
.
4.
Select
Notification recipients
.
5.
Specify destination settings.
Up to 5 destinations can be registered by following the steps below.
1.
Select number of destination.
2.
Select
Add
.
3.
Enter e-mail address, and then select printer status to send information.
4.
Select
OK
.
The registration for destination is completed.
6.
Select
Device settings
>
Status notification e-mail
>
Retry settings
.
7.
Specify resending settings.
The number of resending can be specified by following the steps below.
1.
Specify number of resending.
2.
Specify interval of resending.
3.
Select
OK
.
255