Custom size settings, Dialog box, Open the – Canon imagePROGRAF TM-300 36" Large-Format Inkjet Printer with L36ei Scanner Kit User Manual
Page 636: Borderless setting, Custom size settings dialog box, Borderless setting dialog box, Roll paper options dialog box
Paper Source
Shows the source from which paper is supplied.
You may be able to switch the paper source with the printer driver.
Roll Paper
Feeds paper using roll paper.
Cut Sheet
Feeds paper using the cut paper.
Important
• Depending on the media type and size, the
Paper Source
settings that can be selected may differ.
Roll Width
Select the roll paper width.
Select the width that matches the width of the roll paper loaded in the printer.
Roll Paper Options
.
You can specify auto cut, banner printing, and other settings for printing on roll paper.
Size Options...
.
The
Paper Size Options
dialog box allows you to create and register any user-defined paper.
Custom Size Settings dialog box
This dialog box allows you to specify the size (width and height) of the custom paper.
Paper Size
Specifies the
Width
and the
Height
of the custom paper. Measurement is shown according to the
units specified in
Units
.
Units
Select the unit for entering a user-defined paper size.
Borderless Setting dialog box
Use
Amount of Extension
to adjust how much of the document extends off the paper during borderless
printing.
Amount of Extension
Adjusts how much of the document extends off the paper during borderless printing.
Moving the slider to the right increases the amount of extension and allows you to perform borderless
printing with no problems.
Moving the slider to the left reduces the amount of extension and expands the range of the document
to print.
Roll Paper Options dialog box
You can specify settings for printing on roll paper.
636