Connection – Canon imagePROGRAF TM-300 36" Large-Format Inkjet Printer with L36ei Scanner Kit User Manual
Page 299
Reconfiguration Method of LAN Connection/Reconfiguration
Method of Wi-Fi Connection
Changing LAN Connection Method
Changing Wireless LAN Connection Method
Changing LAN Connection Method
Follow either procedure below to change LAN connection method (wired or wireless).
•
For Windows:
◦ Redo setup using the Setup CD-ROM or from the web page.
◦ Select
Enable
for
Enable/disable Wired LAN
or
Enable/disable Wi-Fi
in the touch screen
menu.
After that, perform settings on the
Network Settings
screen on IJ Network Device Setup Utility.
Performing/Changing Wi-Fi Settings
Connection (Ethernet Cable) Settings
•
For macOS:
Redo setup from the web page.
Changing Wi-Fi Connection Method
Follow either procedure below to change Wi-Fi connection method (infrastructure or wireless direct).
•
For Windows:
◦ Redo setup using the Setup CD-ROM or from the web page.
◦ Perform settings on the
Network Settings
screen on IJ Network Device Setup Utility.
Important
• Before you perform settings using IJ Network Device Setup Utility, change the printer settings
following the procedure below.
1.
Check that printer is turned on.
2.
Select
(
Network status
) icon.
If you specify the administrator password, enter the password.
3.
Select
Wi-Fi
.
4.
Select
Settings
.
299