Canon imagePROGRAF TM-300 36" Large-Format Inkjet Printer with L36ei Scanner Kit User Manual

Page 319

C: Search...

The

Detected Wireless Routers

screen is displayed to select a wireless router to connect to.

For a wireless router already connected to the computer,

Available

is displayed on

Communication Status

If you select a wireless router with

Not Connected

Communication Status

from the list,

clicking

Set

displays the WPA/WPA2 or WEP setting screen for a wireless router.

D: Encryption Type:

Displays the encryption method used over the Wi-Fi.

• IPv4 settings

Note

• The setting items below are available only when

Infrastructure

is selected for

Network

Type:

Direct

is selected, all items are displayed in a gray out status and you cannot perform any

settings.

A: Use IPv4 address

Always selected. (displayed in a gray out state)

B: Get IP address automatically

Select this option to use an IP address automatically assigned by a DHCP server. DHCP
server functionality must be enabled on your router.

C: Use next IP address

Select this option if no DHCP server functionality is available in your setup where you use the
printer, or you want to use a fixed IP address.

Enter the IP address, subnet mask, and default gateway.

319