Color mode – Canon imagePROGRAF TM-300 36" Large-Format Inkjet Printer with L36ei Scanner Kit User Manual
Page 178
Color mode
Lets you specify the color(s) to use when printing HP-GL/2 data.
This setting item is displayed by tapping in the following order.
(
Setup
) >
Device settings
>
Print settings
>
HP-GL/2 print settings
>
Print quality settings
•
Color (perceptual)
◦ If you select
Line drawing
for
Print target
:
Reproduces colors of general images naturally and features smooth gradation. In addition, selecting
this setting allows you to adjust colors easily using an application software.
◦ If you select
Photo
for
Print target
:
Reproduces colors of general photos naturally and features smooth gradation. In addition, selecting
this setting allows you to adjust colors easily using an application software.
•
Color (saturation) (Initial setting)
◦ If you select
Line drawing
for
Print target
:
Prints in easy-to-see colors suitable for line drawing.
◦ If you select
Photo
for
Print target
:
Reproduces vivid colors on data such as a poster.
•
Color (correct off)
Performs printing without color matching.
•
Monochrome
◦ If you select
Line drawing
for
Print target
:
Select this setting to print a line drawing using black ink.
◦ If you select
Photo
for
Print target
:
Prints color data converting to monochrome. Continuous tones are reproduced using gray halftones.
•
Monochrome BMP
The colors other than white are printed in black.
178