Canon imagePROGRAF TM-300 36" Large-Format Inkjet Printer with L36ei Scanner Kit User Manual

Page 66

•

When selecting Barcodes in Manage remaining roll amount and if the barcode is not
printed.

A menu for selection of the media type and length is shown on the operation panel. Operate the
operation panel, select the media type to be used, and enter its length.

Important

• When selecting

Enable

Keep media type

, there is no need to specify the type of the paper.

• Cut the edge of the roll using the

Cut paper

function if the edge is creased or soiled. (See

Specifying the Cutting Method for Rolls

.")

• When selecting the media type on the operation panel, make sure the media type set in the printer

driver and the media type loaded on the printer match.

Note

• For details on media types that you can select, see "Paper Information List."

Holding it at the positions indicated, close the roll paper cover.

Note

• Cut the edge of the roll after the paper is advanced if it is soiled or if there are cuts from scissors

or the blade after removing creased edges. (See "

Specifying the Cutting Method for Rolls

.")

• Adjusting the printhead alignment with the type of paper to be used in printing may enhance

printing quality. (See "

Automatic Adjustment to Straighten Lines and Colors

.")