Canon imagePROGRAF TM-300 36" Large-Format Inkjet Printer with L36ei Scanner Kit User Manual
Page 372
Automatic Adjustment to Straighten Lines and Colors
If printed vertical lines are warped or colors are out of alignment, execute
Print head alignment
and adjust
the print head position.
Choose from
Auto (standard)
or
Auto (fine)
for automatically adjusting the print head.
Minor warping and misaligned colors can usually be improved by executing
Auto (standard)
. If there is no
improvement, perform
Auto (fine)
or
Manual
.
Manual Adjustment to Straighten Lines and Colors
When you execute
Auto (standard)
or
Auto (fine)
, the adjustment pattern is printed, and the print head
position is adjusted based on the printing result automatically.
Important
• If the problem, such as misaligned lines, is conspicuous, or other problem, such as color unevenness, is
not solved after executing
Print head alignment
, execute
Print head angle adjustment
and then
execute
Print head alignment
again.
• Because the results of adjustment vary depending on the type of paper used for adjustment, use the
same type of paper as you will use for printing.
• This function is not available with Tracing Paper, Translucent Matte Film, or Clear Film.
• When using cut sheets, do not move the release lever until instructions (guidance) for removing the
paper are displayed.
Moving the release lever during printing or maintenance operations will cause the printer to stop.
Note
• After print head replacement, execute
Print head alignment
. When
Print pattern after new head
is
set to
ON
, print head position adjustment is automatically executed after print head replacement.
• To change the paper type or for more beautiful color borders, perform
Auto (standard)
.
• To ensure clear quality and when replacing the print head, perform
Auto (fine)
to fine-tune the position
between nozzles and colors. To ensure high-quality printing, we recommend that you execute
Auto
(fine)
.
• If adjustment is not possible as expected using special paper, try another type of paper or try
Manual
adjustment.
Manual Adjustment to Straighten Lines and Colors
Paper to Prepare
When using rolls
An unused roll at least 10.00 inches (254.0 mm) wide
372