Canon imagePROGRAF TM-300 36" Large-Format Inkjet Printer with L36ei Scanner Kit User Manual
Page 159
◦
Enable/disable Wi-Fi
Select
Enable
to wirelessly connect via wireless router.
◦
Wi-Fi setup
Select how to setup Wi-Fi.
■
Easy wireless connect
Select if you specify the settings of the access point information to the printer directly from a
device (e.g. smartphone, or tablet) without operating the wireless router. Follow the on-screen
instructions of the connecting device for the setup procedure.
■
Manual connect
Select when you perform settings for Wi-Fi manually using the operation panel of the printer.
■
WPS (Push button method)
Select when you perform settings for Wi-Fi using a wireless router supporting a Wi-Fi Protected
Setup (WPS) push button method. Follow the on-screen instructions during setup.
■
Other connection types
■
Manual connect (adv.)
Select when you perform settings for Wi-Fi manually. You can specify multiple WEP keys.
■
WPS (PIN code method)
Select when you perform settings for Wi-Fi using a wireless router supporting a Wi-Fi
Protected Setup (WPS) PIN code method. Follow the on-screen instructions during setup.
Note
• By tapping
Advanced
, you can set LAN in detail.
For the items that can be set, see the following.
•
Wireless Direct
The following setting information on the Wireless Direct connection is displayed. (Some items are not
displayed depending on printer settings.)
Items
Setting
Connection
Enabled (connected)
/
Enabled (disconnected)
/
Disa-
ble
Network (SSID)/device name
DIRECT-XXXX-TM-300
Password
XXXXXXXXXX (10 characters)
Communication mode
Wireless Direct
Channel
3
Wi-Fi security
WPA2-PSK (AES)
IPv4 address
XXX. XXX. XXX. XXX (12 characters)
IPv4 subnet mask
XXX. XXX. XXX. XXX (12 characters)
159