Canon imagePROGRAF TM-300 36" Large-Format Inkjet Printer with L36ei Scanner Kit - Manual (Page 190)

Rotate
Rotates the image according to the specified setting.
This setting item is displayed by tapping in the following order.
( Setup ) > Device settings > Print settings > HP-GL/2 print settings > Paper settings
• 0 degrees (Initial setting)
Image is not rotated.
• 90 degrees
Specified image is rotated by 90 degrees.
If the part of rotated image is out of the paper width, the part is not printed.
Note
• When the print data includes HP RTL, the HP RTL image part is not rotated.
Note
• If ON is selected for Auto rotation , priority is given to the Auto rotation setting.
190