PLANET XGS3-24042 - Manual (Page 99)

XGS3 Command Guide
1-99
nos.img System files
nos.rom System startup files
Command Mode:
Admin Mode.
Usage Guide:
This command supports command line hints, namely if the user can enter commands in following forms: copy
tftp:// or copy tftp:// and press Enter, following hints will be provided by the system:
tftp server ip/ipv6 address[x.x.x.x]/[x:x::x:x]>
tftp filename>
Requesting for TFTP server address, file name
Example:
(1) Save images in the FLASH to the TFTP server of 10.1.1.1
Switch#copy nos.img tftp://10.1.1.1/nos.img
(2) Obtain system file nos.img from the TFTP server 10.1.1.1
Switch#copy tftp://10.1.1.1/nos.img nos.img
(3) Save images in the FLASH to the TFTP server of 2004:1:2:3::6
Switch#copy nos.img tftp:// 2004:1:2:3::6/ nos.img
(4) Obtain system file nos.img from the TFTP server 2004:1:2:3::6
Switch#copy tftp:// 2004:1:2:3::6/nos.img nos.img
(5) Save the running configuration files
Switch#copy running-config startup-config
Relevant Command:
Write
1.5.3 ftp-dir
Command:
ftp-dir
Function:
Browse the file list on the FTP server.
Parameter:
The form of > is： ftp://:@{ | }, amongst
is the FTP user name, is the FTP user password, { | } is the
IPv4 or IPv6 address of the FTP server.
Command Mode:
Admin Mode