PLANET XGS3-24042 - Manual (Page 1186)

76-4
76.6 debug ldp all
Command:
debug ldp all
no debug ldp all
Function:
Display all debug information related with LDP; when it is disabled, all debug switches will be
disabled too.
Default:
No display of debug information.
Command Mode:
Admin Mode.
Example:
Enable all debug switches.
Switch#debug ldp all
Switch#
76.7 debug ldp dsm
Command:
debug ldp dsm
no debug ldp dsm
Function:
Display debug information related with the LDP downstream state machine; the no operation will
disable the debug information.
Default:
No display of debug information.
Command Mode:
Admin Mode.
Usage Guide:
Implementing this command will display the debug information related with the LDP downstream
state machine. With it is enabled, debug information will be displayed when any the LDP protocol
change related with the downstream state machine happens.
Example:
Enable the debug switch.
Switch#debug ldp dsm