PLANET XGS3-24042 - Manual (Page 368)

20-7
User Guide:
Use “show anti-arpscan trust port” if users only want to check trusted ports. The reset follow the
same rule.
Example:
Check the operating state of ARP scanning prevention function after enabling it.
Switch(config)#show anti-arpscan
Total port: 28
Name Port-property beShut shutTime(seconds)
Ethernet1/0/1 untrust N 0
Ethernet1/0/2 untrust N 0
Ethernet1/0/3 untrust N 0
Ethernet1/0/4 untrust N 0
Ethernet1/0/5 untrust N 0
Ethernet1/0/6 untrust N 0
Ethernet1/0/7 untrust N 0
Ethernet1/0/8 untrust N 0
Ethernet1/0/9 untrust N 0
Ethernet1/0/10 untrust N 0
Ethernet1/0/11 untrust N 0
Ethernet1/0/12 untrust N 0
Ethernet1/0/13 untrust N 0
Ethernet1/0/14 untrust N 0
Ethernet1/0/15 untrust N 0
Ethernet1/0/16 trust N 0
Ethernet1/0/17 untrust N 0
Ethernet1/0/18 supertrust N 0
Ethernet1/0/19 untrust Y 30
Ethernet1/0/20 trust N 0
Ethernet1/0/21 untrust N 0
Ethernet1/0/22 untrust N 0
Ethernet1/0/23 untrust N 0
Ethernet1/0/24 untrust N 0
Ethernet1/0/25 untrust N 0
Ethernet1/0/26 untrust N 0
Ethernet1/0/27 untrust N 0
Ethernet1/0/28 untrust N 0
Prohibited IP: