PLANET XGS3-24042 - Manual (Page 938)

47-4
Define an absolute time-range, this time-range operates subject to the clock of this equipment.
Parameters:
start_time : start time, HH:MM:SS (hour: minute: second)
end_time : end time, HH:MM:SS (hour: minute: second)
start_data : start data, the format is, YYYY.MM.DD（year.month.day）
end_data : end data, the format is, YYYY.MM.DD（year.month.day）
Remark: time-range is one minute per time, so the time error shall be <= one minute.
Command Mode:
Time-range mode
Default:
No time-range configuration.
Usage Guide:
Absolute time and date, assign specific year, month, day, hour, minute of the start, shall not
configure multiple absolute time and date, when in repeated configuration, the latter configuration
covers the absolute time and date of the former configuration.
Examples:
Make configurations effective from 6:00:00 to 13:30:00 from Oct. 1, 2004 to Jan. 26, 2005.
Switch(config)#Time-range admin_timer
Switch(Config-Time-Range-admin_timer)#absolute start 6:00:00 2004.10.1 end 13:30:00
2005.1.26
47.3 access-list (ip extended)
Command:
access-list {deny | permit} icmp {{ } | any-source | {host-source
}} {{ } | any-destination | {host-destination }}
[ []] [precedence ] [tos
][time-range]
access-list {deny | permit} igmp {{ } | any-source | {host-source
}} {{ } | any-destination | {host-destination }}
[<igmp-type>] [precedence ] [tos ][time-range]
access-list {deny | permit} tcp {{ } | any-source | {host-source
}} [s-port { > | range > }] {{ } |
any-destination | {host-destination <dIpAddr> }} [d-port { <dPort> | range <dPortMin>
> }] [ack+ fin+ psh+ rst+ urg+ syn] [precedence ] [tos ][time-range
]