PLANET XGS3-24042 - Manual (Page 885)

45-30
45.3.27 ipv6 pim register-suppression
Command:
ipv6 pim register-suppression <value>
no ipv6 pim register-suppression
Function:
This command is to configure the value of register suppression timer, the unit is second.
Parameter:
<value> is the timer’s value, it ranges from 10 to 65535s.
Default:
60s
Command Mode:
Global Mode
Usage Guide:
If this value is configured at DR, it’s the value of register suppression timer; if this value is
configured at RP and ipv6 pim rp-register-kat is not used at RP, this command modifies
Keepalive-period value. The “no ipv6 pim register-suppression” command restores the default
value.
Example:
Configure the value of register suppression timer to 30s.
Switch(config)# ipv6 pim register-suppression 30
45.3.28 ipv6 pim rp-address
Command:
ipv6 pim rp-address <rp-address> [<group-range>]
no ipv6 pim rp-address <rp-address> [all|<group-range>]
Function:
This command is to configure static RP globally or in a multicast address range. The “no ipv6 pim
rp-address” command cancels static RP.
Parameter:
<rp-address> is the RP address, the format is X:X::X:X ,ipv6 address
<group-range> is the expected RP, the format is X:X::X:X/M, ipv6 address and prefix length all the
ranges
Default:
This switch is not a RP static router
Command Mode: