PLANET XGS3-24042 - Manual (Page 799)

44-74
Switch(config)#show ip pim anycast-rp non-first-hop
IP Multicast Routing Table
(*,G) Entries: 0
(S,G) Entries: 1
(E,G) Entries: 0
INCLUDE (192.168.10.120, 225.1.1.1)
Local .l..............................
Display Explanation
Entries The number of all kinds of entries.
INCLUDE The mrt information created in the first hop RP.
44.5.9 show ip pim anycast-rp status
Command:
show ip pim anycast-rp status
Command Mode:
Admin and Configuration Mode.
Usage Guide:
Display the configuration information of ANYCAST RP, whether ANYCAST RP globally enables,
whether the self-rp-address is configured and the list of currently configured ANYCAST RP set.
Example:
Switch(config)#show ip pim anycast-rp status
Anycast RP status:
anycast-rp:Enabled!
self-rp-address:192.168.3.2
anycast-rp address: 1.1.1.1
other rp unicast rp address: 192.168.2.1
other rp unicast rp address: 192.168.5.1
anycast-rp address: 192.168.1.4