PLANET XGS3-24042 - Manual (Page 341)

19-187
Set the reachable-time of sending router advertisement in interface vlan 1 as 10000 milliseconds.
Switch#(Config-if-Vlan1)#ipv6 nd retrans-timer 10000
19.2.26 ipv6 nd other-config-flag
Command:
ipv6 nd other-config-flag
Function:
Set the flag representing whether information other than the address information will be obtained via
DHCPv6.
Command Mode：
Interface Configuration Mode.
Default:
Information other than the address information won’t be obtained via DHCPv6.
Examples:
Set IPv6 information other than the address information in interface vlan 1 will be obtained via
DHCPv6.
Switch#(Config-if-Vlan1)#ipv6 nd other-config-flag
19.2.27 ipv6 nd managed-config-flag
Command:
ipv6 nd managed-config-flag
Function:
Set the flag representing whether the address information will be obtained via DHCPv6.
Command Mode：
Interface Configuration Mode.
Default:
The address information won’t be obtained via DHCPv6.
Examples:
Set IPv6 address information in interface vlan 1 will be obtained via DHCPv6.
Switch#(Config-if-Vlan1)#ipv6 nd managed-config-flag
19.2.28 ipv6 neighbor