PLANET XGS3-24042 - Manual (Page 833)

44-108
Default:
IGMP Snooping is disabled by default.
Usage Guide:
To configure IGMP Snooping on specified VLAN, the global IGMP Snooping should be first enabled.
Disable IGMP Snooping on specified VLAN with the “no ip igmp snooping vlan ”
command.
Example:
Enable IGMP Snooping for VLAN 100 in Global Mode.
Switch(config)#ip igmp snooping vlan 100
44.10.7 ip igmp snooping vlan immediate-leave
Command:
ip igmp snooping vlan immediate-leave
no ip igmp snooping vlan immediate-leave
Function:
Enable the IGMP Snooping fast leave function for the specified VLAN; the “no ip igmp snooping
vlan immediate-leave” command disables the IGMP Snooping fast leave function.
Parameter:
is the VLAN number specified.
Command mode:
Global Mode
Default:
This function is disabled by default.
Usage Guide:
Enable immediate-leave function of the IGMP Snooping in specified VLAN; the“no” form of this
command disables the immediate-leave function of the IGMP Snooping.
Example:
Enable the IGMP Snooping fast leave function for VLAN 100.
Switch(config)#ip igmp snooping vlan 100 immediate-leave
44.10.8 ip igmp snooping vlan l2-general-querier
Command:
ip igmp snooping vlan < vlan-id > l2-general-querier
no ip igmp snooping vlan < vlan-id > l2-general-querier