PLANET XGS3-24042 - Manual (Page 54)

XGS3 Command Guide
1-54
1.1.7 debug ssh-server
Command:
debug ssh-server
no debug ssh-server
Function:
Display SSH server debugging information; the “no debug ssh-server” command stops displaying SSH server
debugging information.
Default:
This function is disabled by default.
Command mode:
Admin Mode.
1.1.8 disable
Command:
disable
Function:
Disable admin mode.
Command mode:
Admin Mode.
Example:
Switch#disable
Switch>
1.1.9 enable
Command:
enable
Function:
Use enable command to enter Admin Mode from User Mode.
Command mode:
User Mode/ Admin Mode.
Usage Guide:
To prevent unauthorized access of non-admin user, user authentication is required (i.e. Admin user password is
required) when entering Admin Mode from User Mode. If the correct Admin user password is entered, Admin Mode
access is granted; if 3 consecutive entry of Admin user password are all wrong, it remains in the User Mode. Set the
Admin user password under Global Mode with “enable password” command.