7 show savi ipv6 check source binding – PLANET XGS3-24042 User Manual
Page 1060
58-13
Enable ND packets debug.
Switch#debug ipv6 nd snooping packet
58.2.1.7 show savi ipv6 check source binding
Command:
show savi ipv6 check source binding [interface<if-name>]
Function:
Show the global SAVI binding entry list.
Parameter:
if-name: port name such as interface ethernet 1/0/1.
Command Mode:
Admin Mode.
Usage Guide:
Descriptions of each field are as below:
Field
Description
MAC
The bound MAC address
IP
The bound IP address
Vlan
The binding VLAN belongs to
Port
The binding port belongs to
Type
Binding type
State
Binding state
Expires
The bound lifetime period
Example:
Show the global binding state of SAVI.
Switch(config)#show savi ipv6 check source binding
Static binding count: 0
Dynamic binding count: 3
Binding count: 3
MAC IP VLAN Port Type State Expires
--------------------------------------------------------------------------------------------------------------
00-25-64-bb-8f-04 fe80::225:64ff:febb:8f04 1 Ethernet1/0/5 slaac BOUND 14370
00-25-64-bb-8f-04 2001::13 1 Ethernet1/0/5 slaac BOUND 14370
00-25-64-bb-8f-04 2001::10 1 Ethernet1/0/5 slaac BOUND 14370