PLANET XGS3-24042 - Manual (Page 614)

36-253
Displayed information’s Explanations
Link-LSA (Interface Vlan1) Link LSA messages of interface Vlan1
Router-LSA (Area 0.0.0.0) Router LSA messages in Area 0
Network-LSA (Area 0.0.0.0) Network LSA in Area 0
Intra-Area-Prefix-LSA (Area 0.0.0.0) Intra-domain Prefix LSA in Area 0
36.32 show ipv6 ospf interface
Command:
show ipv6 ospf interface |vlan
Function:
Display the OSPF interface messages.
Parameter:
is the name of the interface.
Default:
Not displayed
Command Mode:
All modes
Example:
Switch#show ipv6 ospf interface
Loopback is up, line protocol is up
OSPFv3 not enabled on this interface
Vlan1 is up, line protocol is up
Interface ID 2003
IPv6 Prefixes
fe80::203:fff:fe01:257c/64 (Link-Local Address)
2001:1:1::1/64
OSPFv3 Process (*null*), Area 0.0.0.0, Instance ID 0
Router ID 192.168.2.2, Network Type BROADCAST, Cost: 10
Transmit Delay is 1 sec, State DR, Priority 1
Designated Router (ID) 192.168.2.2
Interface Address fe80::203:fff:fe01:257c
Backup Designated Router (ID) 192.168.2.3