PLANET XGS3-24042 - Manual (Page 224)

12-70
number is 4094. It should be noted that dynamic VLANs learnt by GVRP cannot be deleted by this
command.
Example:
Create VLAN100 and enter the configuration mode for VLAN 100.
Switch(config)#vlan 100
Switch(Config-Vlan100)#
12.1.35 vlan internal
Command:
vlan <2-4094> internal
Function:
Specify the internal VLAN ID. After an ID is specified as the internal VLAN ID, it is not allowed to be
used by other VLAN. Internal VLAN is only used to LOOPBACK interface and can not add physical
port. New internal VLAN ID takes effect after save the configuration and reboot the switch.
Parameter:
<vlan-id>: The ID is specified as internal VLAN ID, the range is 2 to 4094.
Command mode:
Global Mode.
Default:
1006.
Usage Guide:
Set 1006 as the default internal VLAN ID, the internal VLAN ID needs to be modified when the
network set 1006 as VLAN ID. Internal VLAN ID must select an unused ID or else affect other VLAN.
This command takes effect after save the configuration and reboot the switch.
Example:
Set 100 as the internal VLAN ID.
Switch(config)#vlan 100 internal
12.1.36 vlan ingress enable
Command:
vlan ingress enable
no vlan ingress enable
Function:
Enable the VLAN ingress rule for a port; the “no vlan ingress enable” command disables the