PLANET XGS3-24042 - Manual (Page 69)

XGS3 Command Guide
1-69
The user can select the language according to their preference.
1.1.38 write
Command:
write
Function:
Save the currently configured parameters to the Flash memory.
Command mode:
Admin Mode.
Usage Guide:
After a set of configuration with desired functions, the setting should be saved to the Flash memory, so that the
system can revert to the saved configuration automatically in the case of accidentally powered off or power failure.
This is the equivalent to the copy running-config startup-config command.
1.2 Commands for Telnet
1.2.1 authentication ip access-class
Command:
authentication ip access-class {|}
no authentication ip access-class
Function:
Binding standard IP ACL protocol to login with Telnet/SSH/Web; the no form command will cancel the binding ACL.
Parameters:
is the access-class number for standard numeric ACL, ranging between 1-99;
is the access-class name for standard ACL, the character string length is ranging between 1-32.
Default:
The binding ACL to Telnet/SSH/Web function is closed by default.
Command Mode:
Global Mode.
Example:
Binding standard IP ACL protocol to access-class 1.
Switch(config)#authentication ip access-class 1 in
1.2.2 authentication ipv6 access-class