PLANET XGS3-24042 - Manual (Page 61)

XGS3 Command Guide
1-61
password is the configured code. Encryption will be performed by entering 8.
Command mode:
Global mode
Default:
This password is empty by system default
Usage guide:
When both this password and login command are configured, users have to enter the password set by password
command to enter normal user mode on console.
Example:
Switch(config)#password 0 test
Switch(config)#login
1.1.22 reload
Command:
reload
Function:
Warm reset the switch.
Command mode:
Admin Mode.
Usage Guide:
The user can use this command to restart the switch without power off.
1.1.23 service password-encryption
Command:
service password-encryption
no service password-encryption
Function:
Encrypt system password. The “no service password-encryption” command cancels the encryption.
Command mode:
Global Mode
Default:
No service password-encryption by system default
Usage guide:
The current unencrypted passwords as well as the coming passwords configured by password, enable password
and username command will be encrypted by executed this command. no service password-encryption cancels this
function however encrypted passwords remain unchanged.