PLANET XGS3-24042 - Manual (Page 1030)

56-1
Chapter 56 Commands for MAB
56.1 authentication mab
Command:
authentication mab {radius | none}
no authentication mab
Function:
Configure the authentication mode and priority of MAC address authentication, the no command
restores the default authentication mode.
Parameters:
radius means RADIUS authentication mode, none means the authentication is needless.
Default:
Using RADIUS authentication mode.
Command Mode:
Global mode
Usage Guide:
none option is used to the fleeing function of MAC address authentication. If all configured RADIUS
servers don’t respond, switch will adopt none authentication mode to allow that MAC address
authentication users access the network directly.
Example:
Configure the fleeing function of MAC address authentication.
Switch(config)#authentication mab radius none
56.2 clear mac-authentication-bypass binding
Command:
clear mac-authentication-bypass binding {mac WORD | interface (ethernet IFNAME | IFNAME)
| all}
Function:
Clear MAB binding information.
Parameters:
MAC: Delete MAB binding of the specified MAC address
IFNAME: Delete MAB binding of the specified port
all: Delete all MAB binding