PLANET XGS3-24042 - Manual (Page 62)

XGS3 Command Guide
1-62
Example:
Encrypt system passwords
Switch(config)#service password-encryption
1.1.24 service terminal-length
Command:
service terminal-length <0-512>
no service terminal-length
Function:
Configure the columns of characters displayed in each screen on terminal (vty). The “no service terminal-length”
command cancels the screen shifting operation.
Parameter:
Columns of characters displayed on each screen of vty, ranging between 0-512.
Command mode:
Global Mode
Usage guide:
Configure the columns of characters displayed on each screen of the terminal. The columns of characters displayed
on each screen on the telent.ssh client and the Console will be following this configuration.
Example:
Set the number of vty threads to 20.
Switch(config)#service terminal-length 20
1.1.25 sysContact
Command:
sysContact
no sysContact
Function:
Set the factory contact mode, the “no sysContact” command reset the switch to factory settings.
Parameter:
is the prompt character string, range from 0 to 255 characters.
Command mode:
Global Mode
Default:
The factory settings.
Usage guide: