6 mkdir, 7 pwd, Mkdir – PLANET XGS3-24042 User Manual
Page 108
XGS3 Command Guide
2-108
Command Mode:
Admin Mode.
Default Settings:
None.
Usage Guide:
1. After formatting, all files on the storage device will be irrecoverably lost.
2. The only acceptable file system type of Format is FAT 32, without exception.
3. This command cannot be used to format flash.
2.6 mkdir
Command:
mkdir <directory>
Function:
Create a sub-directory in the designated directory on a certain storage device .
Parameters:
Command Mode:
Admin Mode.
Default Settings:
None.
Usage Guide:
The new created directory should not be named the same as any other directory or file in the designated directory, or
located on a flash device. If any error occurs, a prompt will be displayed.
2.7 pwd
Command:
pwd
Function:
Display the current working directory.
Command Mode:
Admin Mode.
Default Settings:
The default directory is flash.
Example: