TA Triumph-Adler P-C4580DN - Manual (Page 170)

Operation Panel
6-46
Protocol Detail (Detailed settings for the network protocol)
This selects the settings for Protocol Detail.
Use the procedure below.
1
In the TCP/IP Settings menu, press  or  to select Protocol
Detail .
2
Press [OK]. The Protocol Detail menu screen appears.
3
Press  or  to select the item for which you want to make settings.
4
Press [OK]. This displays the setting screen for the item selected in
step 3.
The screen shown is the one when NetBEUI is selected.
5
Press  or  to select On or Off.
6
Press [OK]. The Protocol Detail menu reappears.
Item Description Default Setting Restarting the System*
* : The machine must be restarted after the setting is changed.
×: The machine does not need to be restarted after the setting is changed.
NetBEUI Selects whether or not to receive
documents using NetBEUI. On ×
SNMPv3 Set SNMPv3. Off

FTP (Server) Select whether or not to receive
documents using FTP. On

SNMP Select whether or not to
communicate using SNMP. On

SMTP (E-mail TX) Select whether or not to send e-
mail using SMTP. Off ×
POP3 (E-mail RX) Select whether or not to receive e-
mail using POP3. Off ×
RAW Port Select whether or not to
communicate using RAW Port. On

LPD Select whether or not to receive
documents using LPD as the
network protocol. On

HTTP Select whether or not to
communicate using HTTP. On

LDAP Select whether or not to use LDAP. Off ×
Protocol Detail:
a b
********************-
2 SNMPv3
3 FTP(Server)
[ Exit ]
1 NetBEUI
NetBEUI:
a b
1 Off
********************-
2
*On