TA Triumph-Adler P-C4580DN - Manual (Page 156)

Operation Panel
6-32
Override A4/LTR (Overriding difference between A4 and Letter)
When the Override A4/LTR is turned On using the operation panel, the printer ignores the difference between A4 and
Letter paper sizes. Printing is performed without an error message even if the actual paper size in the current cassette differs
from the paper size formatting the job.
By default, this feature is On.
1
In the Print Settings menu, press  or  to select Override A4/
LTR .
2
Press [OK]. The Override A4/LTR screen appears showing the
shared paper feed mode settings.
3
Press  or  to select the desired shared paper feed mode.
4
Press [OK]. The shared paper feed mode is set and the Print Settings
menu reappears.
Emulation (Setting the emulation)
You can change the emulation mode for the current interface. Use the procedure below to select the mode.
1
In the Print Settings menu, press  or  to select Emulation.
2
Press [OK]. The Emulation menu screen appears.
3
Press  or  to select Emulation Set..
4
Press [OK]. The Emulation Set. screen appears showing a list
of the available emulations. The defaults differ depending on the
delivery destination.
The available emulations are as follows:
PCL6
IBM Proprinter*
DIABLO 630*
EPSON LQ-850*
KPDL
KPDL(Auto)
*This appears when the Emulation Option is installed.
5
Press  or  to select the desired emulation.
6
Press [OK]. The emulation is set and the Print Settings menu
reappears.
Override A4/LTR:
a b
1 Off
********************-
2
*On
Emulation:
a b
********************-
2 KPDL Error Rpt.
3 Alt. Emulation
[ Exit ]
1 Emulation Set.
Emulation Set.:
a b
1 PCL6
2
KPDL
********************- 3
*KPDL(Auto)