TA Triumph-Adler P-C4580DN - Manual (Page 101)

4-19
Document Box
Offset (Offset Setting)
Set whether each set of printed output is offset from the previous set.
1
In the Copies menu or the Paper Selection menu, press
[Function] ([Right Select]). The Function menu appears.
2
Press  or  to select Offset.
3
Press [OK]. The Offset screen appears.
4
Press  or  to select On or Off.
5
Press [OK].
The selected mode is set and you return to the function menu.
Duplex (Setting the duplex printing)
Set duplex printing. For details, refer to Duplex (Setting the duplex printing) on page 6-30.
1
In the Copies menu or the Paper Selection menu, press
[Function] ([Right Select]). The Function menu appears.
2
Press  or  to select Duplex.
3
Press [OK]. The Duplex screen appears showing the list of
available duplex printing modes.
4
Press
 or  to select the desired duplex printing mode.
The message display toggles through the following:
Off (default)
Bind Long Edge
Bind Short Edge
Selecting Off disables duplex printing.
5
Press [OK]. The duplex printing mode is set and the Function menu
reappears.
Function:
a b
********************-
2 Collate
3 Offset 1 Paper Output
Offset:
a b
1 Off
********************-
1
*On
Function:
a b
********************-
2 Collate
3 Offset 1 Paper Output
Duplex:
a b
********************-
2 Bind Long Edge
3 Bind Short Edge 1
*Off