Oki MC363dn - Manual (Page 27)

- 27 -
1. Introduction
Communication Settings
 Acquire the device name.

Interval specification: (Default
setting: 60 minutes, range:
1-1,440)
 Time specification:
 Acquire the status.

Interval specification: (Default
setting: 60 minutes, range:
1-1,440)
 Time specification:

Confirm that the IP address has been
changed.

Interval specification: (Default
setting: 12 hours, range: 1-24)
 Time specification:

Confirm that Active Directory has
been updated.

Interval specification: (Default
setting: 24 hours, range: 1-24)
 Time specification:
 smart PrintSuperVision website
 Enable session timeout.

Session timeout time: (Default
setting: 10 minutes, range:
1-99)
 Communication with devices

Timeout time: (Default setting:
5 seconds, range: 1-99)

Communication retry: (Default
setting: once, range: 0-9)
 Monitor sleeping devices.