Oki MC363dn - Manual (Page 200)

12. Managing Job Logs
[No Logging]
Print jobs received by the device after the log
is full are executed but not recorded to the log.
[Delete Old Log]
Print jobs received by the device after the log
is full are executed and recorded to the log,
overwriting the oldest entry.
5 Click [Apply].
When the “Enter an administrator
password for the device” window is
displayed, enter the administrator
password for the device and click [OK].
Note
• Depending on the device, this may not
be displayed.
• For details on the device’s factory set
administrator password, see the User's
Manual of the device.
6 Click [OK] in the confirmation window.
- 200 -
Displaying Totals
Displaying Totals
1 Configure the settings from [Details
Screen] > [Report] > [Display Report] >
[Job Information].
2 Select [Job Totals] from [Type].
3 Specify the device, log range, totaling
method, display (file) format, etc. and
click [View].
If acquiring the job log before a job, check
that the power of the device for which to
display the job log is turned on and check
[Acquire the device status before the
job.].