Setting use restrictions targeted to the host name, Adding from the job log, Setting use restrictions targeted to the – Oki MC363dn User Manual
Page 159: Host name
9. Restricting Device Use
- 159 -
[Panel Access Control]
[User Name/Password]
Enter the user name and password when
logging in from the device panel.
[PIN]
Enter the PIN ID when logging in from the
device panel.
[Do not specify]
Use the default device method when logging
in from the device panel.
[Invalidity]
It is possible to disable the panel access
control of the device and use the print
restriction function.
[User Auth. Method]
[User Name/Password]
This is enabled when [User Name/Password]
is set in [Panel Access Control]. Specify
from [Local], [LDAP] and [Secure Protocol].
Note
• Displayed items differ depending on the
device.
• The settings in [Panel Access Control]
cannot be changed while the device is
acquiring the job log.
5
Click in [Hosts] to open the use
restrictions setting window for [Hosts].
6
Click [Add].
7
Select [Direct Input] from [How to Specify
Host Name].
8
Enter the host name to add settings to in
[Hosts].
9
Configure the settings in [Restricted Items
List].
For details on restriction items, see “Usage
Limitations” (P. 143).
10
Click [OK].
11
Click [Apply].