Oki MC363dn User Manual
Page 215
13. Environment Settings
- 215 -
4
Click in [Communication Timeout, Retry
Settings] to open the settings window.
5
Configure the [Communication Timeout,
Retry Settings].
[smart PrintSuperVision Webpage]
Configure the settings for cases in which there
are no operations in smart PrintSuperVision for a
set period of time.
[Enable session timeout.]
Check this to log out of smart PrintSuperVision
if there are no operations for a set period of
time.
[Session Timeout Time]
If session timeout is enabled, enter the period
of time (minutes) after which a session timeout
will occur
(range: 1-99 minutes, default: 10 minutes).
[Communicate with Device]
[Timeout Time]
Enter the time (seconds) after which
communication with a device times out if
there is no response from the device.
(range: 1-99 seconds, default: 5 seconds)
[Communication Retry]
Enter the number of times communication
with a device is retried if there is no
response from the device.
(range: 0 - 9 times, default: 1 time)
[Monitor Device during Sleep]
Check this to wake devices from sleep
mode and acquire information if information
cannot be acquired due to the device being
in sleep mode.
6
Click [Apply].