Setting use restrictions targeted to the host name, Adding from the job log, P. 158 – Oki MC363dn User Manual
Page 158
9. Restricting Device Use
- 158 -
3
Select [Other URLs] from [Registered
Document Name List].
4
Configure the settings in [Restricted Items
List].
For details on restriction items, see “Usage
Limitations” (P. 143).
5
Click [OK].
6
Refer to “Adding from the Job Log”
(P. 155) steps
11
and
12
to register the
device.
Setting Use Restrictions
Targeted to the Host Name
If required, use restrictions can be set to
the host name. Add the settings using one
of the following methods.
• Adding from the Job Log
• Adding Manually
Adding from the Job Log
Use restrictions can be set to the host
names included in an acquired job log.
1
Configure from [Details Screen] >
[Manage] > [Device Management
Settings] > [Device Settings].
2
Select the device to configure from
[Device].
3
Click in [Log/Access Control] to open
the settings window.
4
Check [Enable access control.], and set
[Panel Access Control] and [User Auth.
Method:].